Solid Hardwood Bunk Bed w Angle Ladder - Modular Design - Curved
ID# MX-BB-AL-CURV
Modular Collectionselect below options to see correct price, dimensions and availability.
Material | Knot-free Solid Birch, Maple, or Aspen. |
Split option | Can easily split into two separate beds. |
Weight capacity | Rated for 400 lb, tested for up to 800 lb. Lower bunk is not rated. |
Ladder | Entry styles are reversible and can be positioned on either side of the bed. |
Warranty | 1 year |
Color | Espresso |
Made in | Vietnam |
Solid Hardwood Bunk Bed
This solid hardwood bunk bed is part of our Modular Design collection. It comes with an angled ladder and a metal handlebar. You can choose to install this ladder on the left or right hand side.
Color is in White finish and it is pure paint therefore you can not see the wood grains.
Headboard is Curved style for an elegant look.
This bunk bed is available in heights of 61, 66 and 71 inches.
Finally, the Modular design comes in different sizes you can choose from.
Usability
The modular design means you have zillions of options of use and lots of possibilities in the future. This is because you can purchase pieces individually which in turn gives you lots of flexibility.
Our modular design solid hardwood bunk bed is suitable for use by kids, teens or adults.
You can divide this bunk bed into two separate beds.
Solid Wood Frame
We use solid hardwood for this bunk bed. Our factory uses Aspen, Maple, or Birch wood interchangeably for the production of this unit. To achieve maximum strength, we use premium knot-free hardwood for this bunk bed.
Its slats are made of plywood. They are about 2.5” wide and 2.5” apart from each other. Each slat comes with holes. So, you can secure every slat to the frame with two wood screws.
Under Bed Storage
You can add a storage trundle under this bunk bed, or normal trundle bed for allowing an extra mattress. Also you can add an under bed dresser or a set of two drawers. These items are independent units so you can add them later on if you choose to.
Safety of Your Bunk Bed
This modular design solid wood bunk bed can hold a tested 400lb weight capacity on the upper deck. The lower deck can almost also hold the same weight, but we do not test the lower deck.
All sizes have a center support on both upper and lower deck, except for the Twin.
The modular design has 4 metal pings, purpose built Rocklocks which lock the upper and lower headboards.
We use acrylic paint for the white finish. For natural and chestnut finishes we use nc lacquer (nitro cellulose). Also, we test the finishes for chemical compliance with US and EU safety standards.
Ladder
You can install the ladder on either the left or right-hand side of your bunk bed to suit your space. You can also do the same for the metal bar. Ladder is Angled for this bunk bed. Angled ladder is easier to climb than the vertical ladder but takes more space. However, if you plan to use a trundle bed or underbed storage, a vertical ladder is going to work better.
The ladder is thick and sturdy. It has anti-slip grooves and each rung is almost 3” wide.
Assembly
Assembly of Modular Design bunk is reasonably simple. No need to assemble the 4 headboards. You only need to assemble the ladder, the guard rails, connect mattress rails, and slats. The tricky bit is installing the Rocklock.
Mattress
Standard size mattress fits this bunk bed just fine. For the upper bunk, you can use a maximum 6” thick mattress. For the lower bunk, depending on which height you are going to choose, use a mattress between 6 to 8” thick.
Summary:
- Part of our Modular Design collection. The design allows you to modify your furniture as your needs evolve.
- Made from knot free premium solid hardwood.
- Converts into 2 standard beds.
- Install the ladder on the left or right side.
- Plywood slats.
- Non-toxic low VOC finish.
- Add under bed storage to maximize space saving