Solid Hardwood Quadruple Bunk Bed w Staircase - Modular Design - Curved - 66" H - Twin over Twin - White

Solid Quadruple Hardwood Bunk Bed

This hardwood quadruple bunk bed with stairs is part of our Modular Design collection. The name is for the fact this bunk is made of many building blocks so you have a lot of choices.

Headboard is Curved style for an elegant look. Curved headboard is 4” taller than the other two headboards.

Colour is in White finish and it is pure paint therefore you can not see the wood grains. You can match the white color bunk bed with any bedding or existing furniture since there is little variation in pure white color.

The overall height is 66 inches which is compatible with a standard 96” ceiling.

You can split this bunk bed into two beds. Upper headboards are 31” each and lower headboards are 35” each. This means if you decide to split this bunk bed, you will get two identical beds with a High-Low look.

Size of this bunk bed is Twin over Twin which is also known as single over single.

NOTE for Headboard Entry

Please note, when and if you decide to split the bunk bed, the headboard with the opening is going to look inconsistent with the other headboard.

Usability

The modular design means you have zillions of options of use and lots of possibilities in the future. This is because you can purchase pieces individually which in turn gives you lots of flexibility.

Our modular design hardwood quadruple bunk bed is suitable for use by kids, teens or adults.

This hardwood quadruple bunk bed is made up of two bunk bed sets which connect on one end of each bunk using the stairs. Also, this quadruple bunk bed divides into components which you can use to make other pieces. However, you will need additional headboards if you want to turn this bunk into four beds.

Under Bed Storage

You can add a storage trundle under this bunk bed, or normal trundle bed for allowing an extra mattress. Alternatively, you can add an under bed dresser or a set of two drawers. These items are independent units so you can add them later on if you choose to.

Solid Wood Frame

We use solid hardwood for this bunk bed. Our factory uses Aspen, Maple, or Birch wood interchangeably for the production of this unit. To achieve maximum strength, we use premium knot-free hardwood for this bunk bed.

Its slats are made of plywood. They are about 2.5” wide and 2.5” apart from each other. Each slat comes with holes. So, you can secure every slat to the frame with two wood screws.

Safety of Your Bunk Bed

This modular design hardwood quadruple bunk bed can hold a tested 400lb weight capacity on the upper decks. The lower decks can almost also hold the same weight, but we do not test the lower decks.

On the upper deck, all sizes except the twin have center support. We use a metal support bar for extra-long and queen-size beds and a wooden center beam for full-size bunk and loft beds. The center support is available only for XL and queen sizes on the lower deck of bunk beds. We do not use center support for the lower deck of full-size bunk beds or for full-size platform beds in this collection.

The modular design has 4 metal pings, purpose built Rocklocks which lock the upper and lower headboards.

We use acrylic paint for the white finish. For natural and chestnut finishes we use nc lacquer (nitro cellulose). Also, we test the finishes for chemical compliance with US and EU safety standards.

Stairs

This hardwood quadruple bunk bed comes with four stairs and each stair has a drawer in it. Drawers are also wood, soft-close feature plus with dove-tailed joinery. Lower drawers do not go all the way to the end, only the upper two drawers do.

Also, this staircase comes with a solid banister for additional safety and ease when climbing.

Assembly

Assembly of this Modular Design hardwood quadruple bunk bed with stairs is reasonably simple. No need to assemble the headboards or stairs. You need to assemble the guard rails, connect mattress rails, and slats.

Stairs come in two pieces. Lower three stairs are one piece and one upper stair is another piece. These stairs can go to either the right or left side.

Mattress

Standard size mattress fits this bunk bed just fine. For the upper bunk, you can use a maximum 6” thick mattress. For the lower bunk, depending on which height you are going to choose, use a mattress between 6 to 8” thick.

Summary:

• Part of our Modular Design collection. The design allows you to modify your furniture as your needs evolve.
• Made from knot free premium solid hardwood.
• Converts into four beds with additional headboards.
• Includes stairs, guard rails, and slats.
• Staircase has 4 drawers for extra storage.
• Solid wood slats.
• Non-toxic low VOC finish.
• Add under bed storage to maximize space saving.
• Curve headboards are 4” taller than the Panel or Slat versions.