Solid Hardwood Bunk Bed w Slide Platform End - Modular Design - Panel - 71" H - Full XL over Full XL - Chestnut
ID# MX-GAMUTXL-P-CModular Collection
Length: 102.5Width: 57.5Height: 71
Weight & Dimensions
Features & Specifications
|Material||Knot-free Solid Birch, Maple, or Aspen.|
|Weight capacity||Rated for 400 lb, tested for up to 800 lb. Lower bunk is not rated.|
|Warranty Note||1 year|
|Climbing||Entry styles are reversible and can be positioned on either side of the bed.|
This Modular design hardwood bunk bed with Sliding Platform is part of our Modular Design collection. The name is because of the fact that it is made of many building blocks which give you a lot of choices.
Headboard is Panel style for a cozier look and feel.
Color, or stain, is in Chestnut finish and you can see the wood grains as well. Chestnut color is reddish in tone and is a traditional finish.
The overall height is 71 inches which is compatible with a 96” standard ceiling. You can split this bunk bed into two beds. Upper headboards are 31” each and lower headboards are 40” each. This means when and if you decide to split this bunk bed, you will get two identical beds with a High-Low look.
Size of this bunk bed is Full extra long over Full extra long which is also known as double over double extra long. Full XL has the same length as Queen size.
The modular design means you have zillions of options before your purchase and lots of possibilities in the future. This is because you can purchase parts separately that you can use to convert your bunk into something else. You can also use this sliding platform with or without the slide and therefore use it for a very long time.
You can use our modular design hardwood bunk bed for kids, teens or adults. It is also suitable for commercial use in your BnB or rental property.
Solid Wood Frame
We use solid hardwood for this bunk bed. Our factory uses Aspen, Maple, or Birch wood interchangeably for the production of this unit. To achieve maximum strength, we use premium knot-free hardwood for this bunk bed.
Its slats are made of plywood. They are about 2.5” wide and 2.5” apart from each other. Each slat comes with holes. So, you can secure every slat to the frame with two wood screws.
Under Bed Storage
There are a variety of under-bed storage solutions for this collection. You can add a storage trundle, or an under-bed dresser. Alternatively, you can add two independent and large roll-in-out drawers under this bunk bed.
Platform is made of solid hardwood. Slide is also made of solid hardwood on the sides and ends. It has this smooth surface of MDF for easy sliding. Depending on your bunk bed’s entrance option, you can install the platform on the left or right hand side or on either end.
The advantage of this sliding platform is that it requires much less space with the slide connecting directly in front of the platform on end. Another advantage is that you can use one size slide platform for all bunks and loft beds in this collection.
This slide connects to the platform using metal hooks. There are two safety pieces that go over these hooks so you do not remove the slide accidentally.
This modular design hardwood bunk bed can hold a tested 400lb weight capacity on the upper deck. The lower deck can almost also hold the same weight, but we do not test the lower deck.
All sizes have center support on the upper deck except for the twin. For the lower deck, the center support is available only for XL sizes and Queen sizes.
The modular design has 4 metal pings, purpose built Rocklocks which lock the upper and lower headboards.
We use acrylic paint for the white finish. For natural and chestnut finishes we use nc lacquer (nitro cellulose). Also, we test the finishes for chemical compliance with US and EU safety standards.
Assembly of this Modular Design hardwood bunk bed is reasonably simple. No need to assemble the headboards. You need to assemble the ladder, the guard rails, connect mattress rails, and slats. You also need to assemble the platform and the slide. The tricky bit is installing the Rocklock.
Standard size mattress fits this bunk bed just fine. For the upper bunk, you can use a maximum 6” thick mattress. For the lower bunk, depending on which height you are going to choose, use a mattress between 6 to 8” thick.
- Part of our Modular Design collection.
- The design allows you to modify your furniture as your needs evolve.
- Made from knot-free premium solid hardwood.
- Converts into two beds or loft with additional pieces.
- Includes bunk bed Frame, slide and platform.
- Install the sliding platform on either end.
- Solid wood slats.
- Non-toxic low VOC finish.
- Add under bed storage to maximize space saving.
Shipping Box Dimensions
|Box ID||L x W x H (inch)||Weight (lbs)|
|Box 1||650||59.3 x 31.7 x 5.5||56.5|
|Box 2||360||59.3 x 41.7 x 5.5||74.8|
|Box 3||401||54.3 x 7.5 x 5.5||31.9|
|Box 4||401||54.3 x 7.5 x 5.5||31.9|
|Box 5||701||81 x 4 x 6||24|
|Box 6||701||81 x 4 x 6||24|
|Box 7||1311||82 x 3 x 5||15|
|Box 8||1311||82 x 3 x 5||15|
|Box 9||1850||73.2 x 22.2 x 6.5||44|
|Box 10||1880||22.4 x 13 x 12.2||15.4|
We offer curbside delivery to cities of the following provinces:
British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, and Quebec.
For cities in remote areas such as small islands or townships or rural communities (cities with less than ~10k population), we may have to ship to the nearest depot for you to pick up from. We do not ship to PO Boxes.
|Order amount||Shipping Cost|
For Atlantic Canada and Territories, please contact us for the shipping rate.
Our products are bulky and heavy. Shipping is a significant portion of the total cost. Normally, the shipping rate can cost anywhere from %10 to %30 of actual products. For the time being, we can not offer a flat rate to the Atlantic and Territories.
Our shipping rate is for the basic door-to-door, or curbside, delivery. Curbside means the driver is not entering inside the premise of your house, apartment, or property.
The shipping rate we offer is for major cities (cities with ~10k population or more) within mentioned provinces. For rural communities, townships, resorts, or cities on small islands, we may have to ship to the nearest depot for you to pick up from.
The location of depots depends on which shipping company we use for your city. It all depends on who gives us the best rate at the time of getting a quote.
Sorry, we can not ship to PO Box addresses. We do need a physical address to ship to.
We use all major, or even minor, shipping and courier companies. After you place your order, we contact a lot of companies to get the best rate possible.
Once we know which company is going to take care of your shipment, we get a tracking number. As soon as products are shipped, we email you the tracking number along with their website of the shipping company so you can track it yourself.
When you receive your order from the courier or trucking company, please inspect each box before signing of. If you see any external damage, write it on the waybill or inform the driver in case of touchless service.
After you open your boxes and find damage(s) on products, please take multiple images and email them to us. We need to know precisely which item you need a replacement for.
Our email address is: