Solid Hardwood Bunk Bed w Angle Ladder - Modular Design - Slatted - 66" H - Twin XL over Twin XL - Chestnut
ID# MX-GOTITXL-S-CModular Collection
Length: 84Width: 42.5Height: 66.25
|Material||Knot-free Solid Birch, Maple, or Aspen.|
|Weight capacity||Rated for 400 lb, tested for up to 800 lb. Lower bunk is not rated.|
|Warranty Note||1 year|
|Climbing||Entry styles are reversible and can be positioned on either side of the bed.|
|Country of Manufacture||Vietnam|
This solid hardwood bunk bed is part of our Modular Design collection. It comes with an angled ladder and a metal handlebar. You can choose to install this ladder on the left or right hand side.
Size of this bunk bed is Twin extra long over Twin extra long. Twin is the same as single. Twin XL has the same length as queen size.
Color, or stain, is in Chestnut finish and you can see the wood grains as well. Chestnut color is reddish in tone and is a traditional finish.
Headboard is Slated style and it is a contemporary take on the traditional mission design.
The overall height is 66 inches which is compatible with a standard 96” ceiling. You can split this bunk bed into two beds. Upper headboards are 31” each and lower headboards are 35” each. This means if you decide to split this bunk bed, you will get two identical beds with a High-Low look.
The modular design means you have zillions of options of use and lots of possibilities in the future. This is because you can purchase pieces individually which in turn gives you lots of flexibility.
Our modular design solid hardwood bunk bed is suitable for use by kids, teens or adults.
You can divide this bunk bed into two separate beds.
Solid Wood Frame
We use solid hardwood for this bunk bed. Our factory uses Aspen, Maple, or Birch wood interchangeably for the production of this unit. To achieve maximum strength, we use premium knot-free hardwood for this bunk bed.
Its slats are made of plywood. They are about 2.5” wide and 2.5” apart from each other. Each slat comes with holes. So, you can secure every slat to the frame with two wood screws.
Under Bed Storage
You can add a storage trundle under this bunk bed, or normal trundle bed for allowing an extra mattress. Also you can add an under bed dresser or a set of two drawers. These items are independent units so you can add them later on if you choose to.
Safety of Your Bunk Bed
This modular design solid wood bunk bed can hold a tested 400lb weight capacity on the upper deck. The lower deck can almost also hold the same weight, but we do not test the lower deck.
All sizes have a center support on upper deck, except for the Twin. For lower deck, all XL and Queen size come with center support as well.
The modular design has 4 metal pings, purpose built Rocklocks which lock the upper and lower headboards.
We use acrylic paint for the white finish. For natural and chestnut finishes we use nc lacquer (nitro cellulose). Also, we test the finishes for chemical compliance with US and EU safety standards.
You can install the ladder on either the left or right-hand side of your bunk bed to suit your space. You can also do the same for the metal bar. Ladder is Angled for this bunk bed. Angled ladder is easier to climb than the vertical ladder but takes more space. However, if you plan to use a trundle bed or underbed storage, a vertical ladder is going to work better.
The ladder is thick and sturdy. It has anti-slip grooves and each rung is almost 3” wide.
Assembly of Modular Design bunk is reasonably simple. No need to assemble the 4 headboards. You only need to assemble the ladder, the guard rails, connect mattress rails, and slats. The tricky bit is installing the Rocklock.
Standard size mattress fits this bunk bed just fine. For the upper bunk, you can use a maximum 6” thick mattress. For the lower bunk, depending on which height you are going to choose, use a mattress between 6 to 8” thick.
- Part of our Modular Design collection. The design allows you to modify your furniture as your needs evolve.
- Made from knot free premium solid hardwood.
- Converts into 2 standard beds.
- Install the ladder on the left or right side.
- Plywood slats.
- Non-toxic low VOC finish.
- Add under bed storage to maximize space saving
|Box ID||L x W x H (inch)||Weight (lbs)|
|Box 1||101||43.7 x 31.5 x 5.5||43.3|
|Box 2||141||43.3 x 36.6 x 5.5||44|
|Box 3||201||39.4 x 7.5 x 5.5||20.9|
|Box 4||201||39.4 x 7.5 x 5.5||20.9|
|Box 5||701||81 x 4 x 6||24|
|Box 6||701||81 x 4 x 6||24|
|Box 7||1311||82 x 3 x 5||15|
|Box 8||1341||64.2 x 7.5 x 3.1||15.8|
|Box 9||1433||59.8 x 5.5 x 4.7||20.9|
|Box 10||20028-100||55.1 x 15.7 x 1.2||15.4|
*Free Shipping on orders over $1200
We offer curbside delivery to cities of the following provinces:
British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, and Quebec.
For cities in remote areas such as small islands or townships or rural communities (cities with less than ~10k population), we may have to ship to the nearest depot for you to pick up from. We do not ship to PO Boxes.
|Order amount||Shipping Cost|
For Atlantic Canada and Territories, please contact us for the shipping rate.
Our products are bulky and heavy. Shipping is a significant portion of the total cost. Normally, the shipping rate can cost anywhere from %10 to %30 of actual products. For the time being, we can not offer a flat rate to the Atlantic and Territories.
Our shipping rate is for the basic door-to-door, or curbside, delivery. Curbside means the driver is not entering inside the premise of your house, apartment, or property.
The shipping rate we offer is for major cities (cities with ~10k population or more) within mentioned provinces. For rural communities, townships, resorts, or cities on small islands, we may have to ship to the nearest depot for you to pick up from.
The location of depots depends on which shipping company we use for your city. It all depends on who gives us the best rate at the time of getting a quote.
Sorry, we can not ship to PO Box addresses. We do need a physical address to ship to.
We use all major, or even minor, shipping and courier companies. After you place your order, we contact a lot of companies to get the best rate possible.
Once we know which company is going to take care of your shipment, we get a tracking number. As soon as products are shipped, we email you the tracking number along with their website of the shipping company so you can track it yourself.
When you receive your order from the courier or trucking company, please inspect each box before signing of. If you see any external damage, write it on the waybill or inform the driver in case of touchless service.
After you open your boxes and find damage(s) on products, please take multiple images and email them to us. We need to know precisely which item you need a replacement for.
Our email address is: