Solid Hardwood Bunk Bed w Angle Ladder and Slide - Modular Design - Slatted - 66" H - Twin over Full - Two Tone
ID# MX-SLICK-WNModular Collection
Length: 80Width: 57.5Height: 66.25
Weight & Dimensions
Features & Specifications
|Split option||Can easily split into two separate single beds.|
|Material||Knot-free Solid Birch, Maple, or Aspen.|
|Weight capacity||Rated for 400 lb, tested for up to 800 lb. Lower bunk is not rated.|
|Ladder||Entry styles are reversible and can be positioned on either side of the bed.|
Solid Hardwood Bunk Bed
This hardwood bunk bed with Angle ladder and slide is part of our Modular Design collection. With two popular finishes - white and natural - two tone wood furniture coordinates with a variety of bedroom furniture.
Headboard is Slated style and it is a contemporary take on the traditional mission design.
Size of this bunk bed is twin over twin which is also known as single over single.
The overall height is 66 inches which is compatible with a standard 96” ceiling. You can split this bunk bed into two beds. Upper headboards are 31” each and lower headboards are 35” each. This means if you decide to split this bunk bed, you will get two identical beds with a High-Low look.
Size of this bunk bed is Twin over Full which is also known as single over double.
The modular design means you have zillions of options before your purchase and lots of possibilities in the future. This is because you can purchase parts separately that you can use to convert your bunk into something else. However, you will need additional headboards if you want to divide this bunk into two beds.
You can use our modular design hardwood bunk bed for kids, teens or adults. Slide works as a lovely add-on piece. That is, use the slide when kids are young and remove it when they are teens. Also, you can keep the bunk for guests or make two beds out of it.
Under Bed Storage
There are a variety of under-bed storage solutions for this collection. You can add a storage trundle, or an under-bed dresser. Alternatively, you can add two independent and large roll-in-out drawers under this bunk bed.
Solid Wood Frame
We use solid hardwood for this bunk bed. Our factory uses Aspen, Maple, or Birch wood interchangeably for the production of this unit. To achieve maximum strength, we use premium knot-free hardwood for this bunk bed.
Its slats are made of plywood. They are about 2.5” wide and 2.5” apart from each other. Each slat comes with holes. So, you can secure every slat to the frame with two wood screws.
This modular design hardwood bunk bed can hold a tested 400lb weight capacity on the upper deck. The lower deck can almost also hold the same weight, but we do not test the lower deck.
All sizes have center support on the upper deck except for the twin. For the lower deck, the center support is available only for XL sizes and Queen sizes.
The modular design has 4 metal pings, purpose built Rocklocks which lock the upper and lower headboards.
We use acrylic paint for the white finish. For natural and chestnut finishes we use nc lacquer (nitro cellulose). Also, we test the finishes for chemical compliance with US and EU safety standards.
Ladder is Angled for this bunk bed. Angle ladder is easier to climb than the vertical ladder but takes more space. You can install the ladder on either the left or right-hand side of your bunk bed to suit your space. You can also do the same for the metal bar. However, if you plan to use a trundle bed or underbed storage, a vertical ladder is going to work better.
The ladder is thick and sturdy. It has anti-slip grooves and each rung is almost 3” wide.
This slide is made of solid hardwood and MDF surface for easy sliding. It comes with two hooks which hook to the mattress rails and these make it easy to remove the slide as and when you want. You can secure these hooks to the mattress rail using screws. For extra safety and to secure the slide, we have extra safety pieces which go over the hooks so that you do not remove the slide accidentally.
You can install this slide on the left or right side.
Assembly of this Modular Design hardwood bunk bed is reasonably simple. No need to assemble the headboards. You need to assemble the ladder, the guard rails, connect mattress rails, and slats. The tricky bit is installing the Rocklock.
Standard size mattress fits this bunk bed just fine. For the upper bunk, you can use one of our 6” thick mattresses. For the lower bunk, depending on which height you are going to choose, use either 6 or 8” thick mattress.
- Part of our Modular Design collection.
- The design allows you to modify your furniture as your needs evolve.
- Made from knot free premium solid hardwood.
- Converts into two beds or loft with additional pieces.
- Includes bunk bed Frame and slide.
- Install the ladder on the left or right side.
- Install the slide on the left or right side.
- Solid wood slats.
- Non-toxic low VOC finish.
- Add under bed storage to maximize space saving.
Shipping Box Dimensions
|Box ID||L x W x H (inch)||Weight (lbs)|
|Box 1||104||43.3 x 32.5 x 5.5||44.9|
|Box 2||344||58.7 x 36.6 x 5.5||63.8|
|Box 3||200||40.2 x 6.1 x 5.5||18.7|
|Box 4||400||55.1 x 6.1 x 6.6||29.7|
|Box 5||700||76 x 5.9 x 3.5||22.4|
|Box 6||700||76 x 5.9 x 3.5||22.4|
|Box 7||1310||77.6 x 5.1 x 2.4||13.2|
|Box 8||1320||48.6 x 18.9 x 4.5||13.2|
|Box 9||1463||59.8 x 5.5 x 4.1||20.9|
|Box 10||20030-100||32.7 x 14.6 x 1.6||4.4|
|Box 11||1881||88.6 x 15.2 x 2.6||30.8|
|Box 12||1890||6.3 x 5.9 x 2||5.5|